MyOxid is the range of metallic paints that are designed to achieve metallic-looking finishes and an oxide effect, thanks to the application of the MyRust oxide activator.
We have products to achieve finishes of bronze, copper, iron, and brass.
It is the range that allows adding an industrial and personal touch to any non-walkable surface. It can be applied both on interior and exterior surfaces.
Versatility of application
Can be applied using a trowel, brush, sponge, roller or spray gun.
Can be applied to any non-walkable surface.
Microcement, concrete, brick, ceramic, etc.
High Adhesion to the substrate
In less absorbent areas, it is recommended to first use our adhesion promoter MyPrimer 200
Ready-to-use product
Do not dilute in water
1. Surface cleaning
Before applying MyOxid it
is necessary to ensure that the
support is clean and dry.
To ensure total cleaning
of the space it is necessary to
vacuum if necessary.
2. Support preparation
1 primer coat MyPrimer 100 if the surface is porous or MyPrimer 200 if the surface is non-porous
3. Application
Apply 1 coat of MyOxid with spatula on the desired space
Dry for 24 hours
4. Oxidation
Sand the surface
Polish the surface
Use MyRust to accelerate the
oxidation
5. Sealing of the surface
2 coats of MyCover for
protection
1st coat: Dry for 4 hours.
2nd coat: Dry for 12 hours.
6. Final sealing
Lijar y dejar pasar 12 horas