MyGlow is a range of ready-to-use metallic glazes used to provide microcement with a metallic appearance, while respecting its natural texture. It has high performance allowing decoration with a personalized touch to the coating.
When applying microcement, every detail matters and with MyGlow, a touch of distinction is achieved that helps to create minimalist and sophisticated environments. It achieves varied effect patinas.
It is a product that is made to be applied on non-passable surfaces both indoors and outdoors. Its application can be made by brush, broom, trowel, roller, gun or sponge.
The colors of MyGlow are: White Silver 500, Aluminum 054, Copper 063, Copper Red 063, Gold 063.
Applicable on any support
Ready to use
Versatility of application
MyGlow Aluminum
12,00 m2/L
MyGlow Copper
23,50 m2/L
MyGlow Copper red
23,50 m2/L
MyGlow Gold
23,50 m2/L
MyGlow Silver
14 m2/L
-Offers metallic finishes of high decoration
-It is a easy-to-apply product, as it is presented ready-to-use
-Great versatility of application, which facilitates the professional's work. It can be applied with roller, gun, trowel, brush, paintbrush or sponge.
-Smoothness of work, which favors an optimal application
-Designed to achieve multiple decorative effects, depending on application tools and the professional's technique
-Great adherence and elasticity
-Finishes with personality and vivid tones of the highest quality
The range of glazes MyGlow is applied on walls over any type of support, be it micro-cement, concrete, ceramic or brick. It is a product that can be used on smooth backgrounds and soft textured backgrounds.
It maintains the character of the support and contributes a touch of high decoration to any surface, either indoor or outdoor.
Before applying MyGlow metallic glazes, you must stir the product to distribute it evenly over the surface. It is a material that can be applied with a trowel, brush or paintbrush and offers versatility in application. Once the metallic glazes have been applied, they need to dry for 8 hours.
The glazes also require a sealing process which protects the final finish and ensures a quality application.
For this, apply two coats of MyCover, with a
drying time of 4 hours between the two coats.
Then sand the surface with a 400 grit sandpaper and allow 12 hours before applying two coats of
MySealant 2K.
Entre las dos manos del barniz sellador se necesitan 24 horas de secado.