MyRevest's single-component microcement is designed to create decorative coatings that offer high hardness. It is the product that incorporates the resin in powder and is designed to make life easier for the professional applicator, who saves the mixing and reduces transportation costs. It is the perfect material to provide the surface with a high mechanical resistance.
The range of single components includes preparation and finishing mortars to cover horizontal and vertical surfaces on any type of support. It is an ideal line of products for professionals who want to renew a surface, reducing the work time.
Only a few millimeters of material are needed to create finishes that adapt to any decorative style. With our products, you can obtain a matte, satin, or glossy effect. The application of single-component microcement on floors and walls results in coatings of great originality and beauty.
MyBase OC is a single-component microcement preparation that is applied prior to the products of MyWall and MyFloor. It is available in 3 granulometries: L, XL, and XXL.
It is of grain thicker and when used as a finish, it obtains more rustic finishes.
It's the coating that offers a wide variety of decorative solutions and simplifies the mixtures. It makes life easier for the applicator without losing quality in the finishes.
Bending resistance
≥ 11.90 N/m² (28 days)
Compression resistance
≥ 30 N/m² (28 days)
Density
Powder - 1.175 ± 50Kg/m3
Paste - 1.545 ± 50Kg/m3
Hardened - 1.470 ±
50Kg/m3
Adhesion to support
≥ 1.5 N/m2 (28 days)
MyBase OC L
(2 layers) - 2.20 Kg/m2
MyBase OC XL
(2 layers) - 2.20 Kg/m2
MyBase OC XXL
(2 layers) - 2.20 Kg/m2
The support to be coated must be in good condition, firm, dust-free, grease, dirt or leftover paint. Prior to the application of microcement, any crack or flaking that may exist on the surface must be corrected.
In the case of porous supports such as self-leveling surfaces, plasters or absorbing pladur, you must apply the MyPrimer 100 primer, which acts as an adhesion promoter and absorption regulator for mineral supports.
Its application is prior to MyBase OC and must be performed after placing the MyMesh mesh on the surface to be coated. With the mesh the risk of mechanical damage to the surface is reduced and the coating is reinforced.
For non-porous ceramic supports, the surface preparation will be carried out by sanding the surface layer to open the pores. It will also be necessary to clean and remove any possible dust remaining on the surface.
With the pores open, a layer of MyBase must be applied to fill the joints and allow a drying time of 24 hours. Once the joints are covered, the MyPrimer 200 primer must be applied with the MyMesh mesh, which must adhere without any kind of folding.
MyBase OC is mixed with water and pigments depending on the color you want to obtain.
The relationship between microcement and water:
10 kg of MyFloor OC L - 2.3 liters of water
10 kg of MyFloor OC XL - 2.2 liters of water
10 kg of MyFloor OC XXL - 2.1 liters of water
MyWall OC is the single-component microcement suitable for covering walls with natural finishes. It is recommended for vertical non-walkable surfaces. It is available in 3 granulometries: XS, S and M.
Its application provides fine surfaces with smooth finishes. This material achieves a coating that enhances minimalist finishes in any part of the home. It is designed for surfaces with a high decorative value.
The aesthetic possibilities offered by this material are combined with its good workability and hardness.
Bendning resistance
≥ 8 N/m² (28 days)
Compression resistance
≥ 29 N/m² (28 days)
Density
Powder - 1.005 ± 50Kg/m3
Paste - 1.505 ± 50Kg/m3
Hardened - 1.285 ±
50Kg/m3
Adhesion to the support
≥ 1.7 N/m2 (28 days)
MyWall OC XS
(2 coats) - 0.60 Kg/m2
MyWall OC S
(2 coats) - 0.60 Kg/m2
MyWall OC M
(2 coats) - 0.60 Kg/m2
MyBase OC is mixed with water and pigments depending on the color you want to obtain.
The ratio between microcement and water:
10 kg of MyWall OC XS - 3.5 liters of water
10 kg of MyWall OC S - 3.0 liters of water
10 kg of MyWall OC M - 2.8 liters of water
MyFloor OC is the single component microcement recommended for indoor floors and has a medium grain texture. It is available in 2 granulometries: M and L.
This product achieves continuous pavements with elegant and natural finishes. In this way, the water effect is present but in a more subtle way. It is applied in bathrooms, lavatories, shower trays, countertops and staircases.
Bending resistance
10 N/nm2 (28 days)
Compression resistance
≥ 40 N/nm2 (28 days)
Density
In powder - 1.175 ± 50Kg/m3
In paste - 1.480 ± 50Kg/m3
Hardened - 1.430 ±
50Kg/m3
Adhesion to the support
1.2 N/m² (28 days)
MyFloor OC is mixed with water and pigments depending on the color you want to achieve.
The ratio between microcement and water:
10 kg of MyFloor OC M - 3.5 liters of water
10 kg of MyFloor OC L - 3.0 liters of water