MyRevest's monocomponent microcement is designed to create decorative coatings that offer great hardness. It is the product that incorporates the resin in powder form and is designed to make life easier for the professional applicator, saving on mixing and reducing transport costs. It is the perfect material to give the surface a high mechanical resistance.
The range of monocomponents includes mortars for preparation and finishing to coat horizontal and vertical surfaces on any type of support. It is a line of product ideal for professionals who want to renovate a surface by reducing working time.
Just a few millimeters of material are needed to create finishes that can be adapted to any decorative style. With our products, you can achieve a matte, satin, or glossy effect. The application of monocomponent microcement on floors and walls results in coatings of great originality and beauty.
MyBase OC is the monocomponent microcement for preparation that is applied prior to the MyWall and MyFloor products. It is available in 3 grain sizes: L, XL, and XXL.
It has a coarser grain and when used as a finish it achieves more rustic finishes.
It is the coating that offers a wide range of decorative solutions and simplifies the mixes. It makes life easier for the applicator without losing quality in the finishes.
Bending strength
≥ 11.90 N/m² (28 days)
Compressive strength
≥ 30 N/m² (28 days)
Density
In powder - 1.175 ± 50Kg/m3
In paste - 1.545 ± 50Kg/m3
Hardened - 1.470 ±
50Kg/m3
Adhesion to the support
≥ 1.5 N/m2 (28 days)
MyBase OC L
(2 coats) - 2.20 Kg/m2
MyBase OC XL
(2 coats) - 2.20 Kg/m2
MyBase OC XXL
(2 coats) - 2.20 Kg/m2
The support to be covered must be sanitized, firm, free of dust, grease, dirt or paint residues. Prior to the application of microcement you have to correct any cracks or chipping that may exist on the surface.
In the case of porous supports such as self-leveling, plasters or absorbent plasterboard, it needs to apply the MyPrimer 100 primer, which acts as an adhesion promoter and regulator of absorptions for mineral supports.
Its application is prior to MyBase OC and must be carried out after placing the MyMesh mesh on the surface to be coated. With the mesh, the risk of mechanical damage to the surface is reduced and the coating is reinforced.
For non-porous ceramic supports, the surface preparation will be done with a sanding of the surface layer to open the pore. It will also be necessary to clean and remove any possible dust left on the surface.
With the pore open, a layer of MyBase must be applied to fill the joints and leave a drying time of 24 hours. Once the joints are covered, MyPrimer 200 primer should be applied with the MyMesh mesh, which must adhere without any type of fold.
MyBase OC is mixed with water and pigments according to
the color that one intends to achieve.
The relationship between microcement and water:
10 kg of MyFloor OC L - 2.3 liters of water
10 kg of MyFloor OC XL - 2.2 liters of water
10 kg of MyFloor OC XXL - 2.1 liters of water
MyWall OC is the monocomponent microcement suitable for coating walls with natural finishes. It is recommended for vertical surfaces and non-walkable areas. It is available in 3 granulometries: XS, S and M.
Its application provides thin surfaces with smooth finishes. With this material, a coating is achieved that enhances minimalist finishes anywhere in the house. It is designed to achieve surfaces with a high decorative value.
The aesthetic possibilities provided by this material are combined with its good workability and hardness.
Bending resistance
≥ 8 N/m² (28 days)
Compression resistance
≥ 29 N/m² (28 days)
Density
In powder - 1.005 ± 50Kg/m3
In paste - 1.505 ± 50Kg/m3
Hardened - 1.285 ±
50Kg/m3
Adherence to the support
≥ 1.7 N/m2 (28 days)
MyWall OC XS
(2 coats) - 0.60 Kg/m2
MyWall OC S
(2 coats) - 0.60 Kg/m2
MyWall OC M
(2 coats) - 0.60 Kg/m2
MyBase OC is mixed with water and pigments depending on the color you want to achieve.
The ratio between microcement and water:
10 kg of MyWall OC XS - 3.5 liters of water
10 kg of MyWall OC S - 3.0 liters of water
10 kg of MyWall OC M - 2.8 liters of water
MyFloor OC is the single component microcement recommended for indoor floors and has a texture of medium grain. It is available in 2 grain sizes: M and L.
With this product, it is possible to obtain continuous flooring with elegant and natural finishes. Thus, the water effect is present but in a more subtle way. It is applied in bathrooms, sinks, shower trays, countertops, and stairs.
Bending resistance
10 N/nm2 (28 days)
Compression resistance
≥ 40 N/nm2 (28 days)
Density
In powder - 1.175 ± 50Kg/m3
In paste - 1.480 ± 50Kg/m3
Hardened - 1.430 ±
50Kg/m3
Adhesion to the substrate
1,2 N/m² (28 days)
MyFloor OC M
(2 layers) - 1,40 Kg/m2
MyFloor OC L
(2 layers) - 1,40 Kg/m2
MyFloor OC is mixed with water and with the pigments depending on the color you want to obtain.
The relationship between the microcement and water:
10 kg of MyFloor OC M - 3.5 liters of water
10 kg of MyFloor OC L - 3.0 liters of water