Design living room with a microcement wall and a decoration based on fine woods
Design living room with a microcement wall and a decoration based on fine woods

READY-TO-USE MICROCEMENT

Ready-to-use microcement is a mineral mortar manufactured for application on both floors and walls. It is a paste that makes it possible to cover floors and non-transit surfaces in a short time. This product improves productivity and reduces application time, because no mesh or pre-sealing layers are required.

MyReady Go! ready-to-use microcement presents very aesthetic finishes with a modern effect on interior and exterior surfaces. It is suitable for any type of substrate: tile, plaster, cement, plasterboard or marble.

It is characterised by the high adhesion, durability and resistance to wear and tear, which makes it an ideal product for covering bathrooms and kitchens. The flexible paste can prevent crack over time, and its high mechanical resistance protects it from abrasion.

MYREADY GO! 01 READY TO USE

MyReady Go! 01 ready-to-use microcement logo

MyReady Go! 01 is the ready-to-use microcement of fine solution with a smoother texture. The applicator is able to create a silky to the touch coating with a water effect similar to traditional microcement.

It is used as a finishing coat for the wall system and has a maximum granulometry of 0.1 mm. It is applied in one or two coats after two coats of MyReady Go! 03.

It conveys exclusivity and continuity in any renovation or refurbishment projects. With this granulometry, the wall decoration will transmit warmth, exquisiteness and modernity in equal parts.

Technical characteristics

Maximum thickness per layer
0,3 mm

Shore D hardness
45 mg

Density
1,63 g/m3

Taber Abrasion
42 mg

Consumption

MyReady Go! 01

(1 layer) - 0,25 Kg/m2

MyReady Go! 01 10kg black bucket
Application of ready-to-use microcement on a non-trafficable surface with a trowel

MYREADY GO! 02 READY TO USE

MyReady Go! 02 ready-to-use microcement logo

MyReady Go! 02 is the ready-to-use microcement designed for professional applicators who want to save time and offer exquisite, highly decorative finishes. It is the ideal material to optimise work in sealing and is used as a finishing layer on floors.

MyReady Go! 02 can be used on both indoor and outdoor flooring and has a maximum granulometry of 0.2 mm. It gives the surface a very aesthetic, hard and abrasion resistant result.

Its application brings out a more natural texture. It is a product that leaves less water effect and a more stony and uniform appearance.

Technical characteristics

Maximum thickness per layer
0,5 mm

Shore D hardness
66 mg

Density
1,61 g/m3

Taber Abrasion
66 mg

Consumption

MyReady Go! 02

(1 layer) - 0,45 Kg/m2

MyReady Go! 02 10kg black bucket
Application of the MyReady Go! 01 ready-to-use micro-cement finish

MYREADY GO! 03 READY TO USE

MyReady Go! 03 ready-to-use microcement logo

MyReady Go! 03 is the ready-to-use microcement designed for a modern effect on vertical surfaces and to create a cladding that contributes to a more Scandinavian atemosphere. It is a material with enormous potential that makes life easier for the applicators.

It is used as a preparatory layer for walls and has a granulometry of 0.3 mm, with more aggregate and achieve rustic finishes. One or two coats of MyReady Go! 01 are applied on top of this product, depending on the desired finish.

It contains more mineral microcement that enhances the aesthetic possibilities in residential buildings, restaurants and commercial premises.

Technical characteristics

Maximum thickness per layer
0,8 mm

Shore D hardness
45 mg

Density
1,65 g/m3

Taber Abrasion
42 mg

Consumption

MyReady Go! 03

(1 layer) - 0,9 Kg/m2

MyReady Go! 03 10kg Black Bucket
Application of ready-to-use microcement as a finish for the flooring system

MYREADY GO! 04 READY TO USE

MyReady Go! 04 ready-to-use microcement logo

MyReady Go! 04 is the ready-to-use microcement line aimed at looking for aesthetic finishes and speed of application for those professionals

Unlike other microcements, MyReady Go! 04 does not need to mix different components as it is prepared in advance to achieve a quick and easier application than other coatings. Just add the pigment to get the desired colour and stir.

It is used as a preparatory layer for application on floors and has a granulometry of 0.5 mm. On top of this product, MyReady Go! 02 is applied to finish the floor application.

This product does not leave water marks, nor do you notice the undesirable burnt effects that can be left by metallic trowels.

Technical characteristics

Maximum thickness per layer
1,00 mm

Shore D hardness
66 mg

Density
1,67 g/m3

Taber Abrasion
66 mg

Consumption

MyReady Go! 04

(1 layer) - 1,3 Kg/m2

MyReady Go! 04 10kg black bucket

Advantages of applying ready-to-use microcement

HIGHLY DECORATIVE FINISHES

This is the microment that makes life easier for the professional applicators. The only thing they have to do is to add the pigment and start coating.
It is a mixture of resins with quartz that allows highly decorative finishes to be obtained.
The ready- to - use line saves work time in preparation and drying. The quick application is an added value when carrying out renovation projects

HIGH QUALITY PIGMENTS

It is a material that does not require water or resin for its preparation. You can just add the desired pigment and stir. It is also not necessary to apply several layers of sealer, which means faster and more efficient work times.
High quality pigments become the best ally to achieve the same colour effect on the floor or wall, and creat an unique stamp on each project.

MATERIAL WITH HIGH MECHANICAL RESISTANCE

Thanks to its additives,the high mechanical resistance makes it an ideal material for application on large surfaces. It is easy and quick to apply, but it requires the substrate to be regularised, whether it is an absorbent or non-absorbent surface.
This product makes it easier for the applicator to leave his signature on the coatings. It is designed for the professional who is looking for different effects and textures.

APPLICABLE ON INTERIOR AND EXTERIOR SURFACES

Ready-to-use microcement can be applied on both interior and exterior surfaces. It is easy to work and is smoother, therefore requires less sanding between coats. It means that less dust is produced when sanding, as less sanding is required.

TOP PERFORMING PRODUCT

When the applicator buys ready-to-use microcement, he gets a product with maximum performance. You can use as much product as you need without fear of wastage.
With ready-to-use, a small amount of product can be stored in a closed container without being wasted. The material will not harden and can be used in the future.

Ready-to-use micro-cement tiled living room decorated with pale pinks and turquoise blue.