Pool with white microcement
White pool lined with microcement


It is time to immerse yourself in a world of unique sensations. Make each bath unforgettable and even more relaxing thanks to our microcement for swimming pools, MyPool.

With our two-component microcement for swimming pools, you will create continuous spaces where elegance and modernity meet on edges, crowns and bowls. Coatings that will stay indelible over time for the magnificent performance they provide. A mortar capable of resisting UV rays, water vapor and any impact, maintaining a flawless appearance indefinitely.

With MyPool not only can pools be infinite, also fountains, ponds, saunas or spas or any area that is in constant contact with water can benefit from these aesthetic features. A microcement of simple application that allows the professional to go for different techniques, as it can be done with the fresh on fresh technique.


Microcement for white-colored pools

MyPool XXL is the preparation microcement for swimming pools that has an aggregate thickness of 0.9 mm. It gives it that rough texture and an unusual hardness in this type of coatings with which it turns every surface on which it is applied into a resistant area, no matter the zone. Its versatility opens up a world of usage fields, in which the firmness of the base in the bowl, always submerged, or on the edges and crown will always be guaranteed.

This granulometry transforms into a roughness that not only creates beautiful and resistant spaces from scratch or refreshes existing surfaces, but also adds an extra level of safety. With MyPool XXL, safe spaces are easily achieved to prevent falls and slips thanks to its anti-slip finishes. A fundamental factor when we talk about swimming pools.

Technical Characteristics

Maximum aggregate thickness
0.9 mm

Bending resistance
≥vv9 N/m2 (28 days)

Slip resistance (EN-ENV-12633)
Class 2 or 3 depending on the finish that is left.

Compression resistance (EN 13892-2)
≥55 N/m² (28 days)

Adherence Resistance (EN 13892-8)
≥ 1.5 N/m² (28 days)


The performance of the MyPool XL swimming pool microcement is 2 coats 4.0 kg/m2


The product is available in 18 kg containers.

MyRevest's MyPool XXL 20 kg microcement bucket


Microcement for pools on a terrace overlooking the sea

In MyPool XL, the finishing swimming pool microcement, the aggregate size is 0.6 mm. This provides a fineness that imparts smoothness to the surfaces on which it is applied. A necessary finish to create those infinite surfaces that invite relaxation at any time.

However, despite the delicate finish that seems to be seen from the surface, this coating is extraordinarily robust and helps to reinforce the microcement-coated surface. Aesthetic and functional uniformity for surfaces of endless continuity.

Características Técnicas

Maximum aggregate thickness
0.6 mm

Bending resistance
≥ vv9 N/m2 (28 days)

Slip resistance (EN-ENV-12633)
Class 2 or 3 depending on the finish applied.

Compression resistance (EN 13892-2)
≥55 N/m² (28 days)

Adhesion resistance (EN 13892-8)
≥ 1.5 N/m² (28 days)


The performance of the MyPool XL preparation microcement for swimming pools is at 2 coats 3.0 kg/m2


The product is available in 18 kg packages.

MyRevest's MyPool XXL 20 kg microcement bucket


White microcement pool in hotel

MyResin Pool is a water-based acrylic resin used as a primer for the MyPool system. It is the so-called B component that increases the ability to resist water vapor, increasing its permeability and waterproofing.

Another benefit of this product is that its application greatly reduces shrinkage cracks.

Mixing ratio

3.2 - 3.5L per 10 kg MyPool XL
3 - 3.1L per 10 kg MyPool XXL.


(2 coats) - MyResin Pool has a yield of 0.10 L/m², although this can vary depending on the porosity of the substrate


The product is available in 25 liter containers

MyResin Pool 25 Liters resin container
Aplicación de microcemento con una llana de goma


Microcement edging in a pool at a house

This single-component water-based acrylic varnish is designed to increase both the mechanical and chemical resistances of surfaces coated with microcement, thanks to its composition of acrylic copolymers.

This product demonstrates very high alkali resistance, which is very useful in environments where humidity is usually present.

Technical Characteristics


between 6.5 and 7.5

Viscosity (Ford Cup 4):
10-15 seconds

Density at 20ºC
1 ± 0.01 g/mL

Application temperature
From 10ºC to 25ºC

Touch dry
20 minutes


0.12 L/m2 in two coats


Envases de 5 litros

MyRevest's MyKal S 20 kg tadelakt microcement bucket


Hotel with white microcement pool

Maximum reliability

This is a product with a high degree of water resistance, as we have already seen, it guarantees that there are no shrinkage cracks or bubbles.

For all types of pools

This microcement for swimming pools is prepared to apply in both fresh water pools and those that are saltwater. In either of these two, it shows all the features it has, both chemically and mechanically.

Aesthetically unbeatable

With MyPool, pools become places of maximum relaxation thanks to the continuous surfaces it ensures, which are in line with the latest decorative trends.

Applicative versatility

Either in borders, in the bowl or in the crown of any pool, this microcement can be applied on any surface, guaranteeing the best results in each one.

Guaranteed safety

With MyPool, thanks to the thickness of its grain and the sealer that can be applied to it, slipping in pools is over.

Easy cleaning and maintenance

Being a continuous surface thanks to its lack of joints, it prevents the accumulation of dirt in joints, allowing the pool to always be in the best condition.

Great workability

This quality is demonstrated when it proves that it can also be applied with the fresh on fresh technique, with which different results can be achieved.


MyResin Pool is our water-based acrylic resin designed specifically for our MyPool pool microcement. This works as a component B to give the coated surfaces a superior adhesion and hardness, as well as great water vapor permeability and high water resistance.

Next, the mixing process that must be respected from beginning to end to achieve the best results.

1Measure the quantities

Firstly, for an application to be as efficient and effective as possible, we will have to be very precise in measuring both the resin and the preparation microcement. To ensure the mixture is optimal, the following proportions should be observed:

  • 10 kg of MyPool XL: 3.2 - 3.5 liters of MyResin Pool resin.
  • 10 kg of MyPool XXL: 3 - 3.1 liters of MyResin Pool resin.

It is important to note that these proportions can change, depending on weather conditions.

2Mix components A and B

Once the components have been meticulously measured, they must be poured into a container and stirred together with an electric whisk (this is a recommendation) until a homogeneous and lump-free mass is obtained.


Following various studies we have carried out, we have decided to reduce our color chart for swimming pool microcements to two neutral colors such as Pigmented White and Natural White, which both match the environment and the pools themselves.

These enhance the feeling of calm and relaxation and when spread over joint-free surfaces, the feeling of infinity is increased even more.


Apply MyResin Pool primer

In order for the microcement to adhere perfectly to the surface, a layer of MyPoolResin should be applied with a roller. Let it dry between 30 and 45 minutes.

Mix MyColor Pool with MyPool

Now it's time to mix the pigment with the microcement. So, shake MyColor Pool and attach it to MyResin Pool. Then, add the corresponding granulometry of MyPool and mix for about 4 minutes.

Apply two hands of the MyPool XXL preparation microcement

First, apply a coat without pigment and let dry between 4-8 hours. After this time, apply a second coat with pigment respecting the same drying time.

Apply two coats of MyPool XL finishing microcement

At this point, you should apply two coats of MyPool XL and let dry between 4-8 hours between them. If you want to do it with "wet on wet", apply the second coat of MyPool XL, one hour after the first.

Seal the pool with two hands of MySealant Pool varnish

To protect the applied microcement, you have to apply two coats of MySealant Pool 24 hours later, leaving between 4-8 hours between each. Once this process is finished, it must be left to dry for 7 days.

Fill the pool with water

After 7 days of applying the sealant, fill the microcement pool with water.

Apply two coats of MyPool XL finishing microcement

At this point, you should apply two coats of MyPool XL and let dry for 24 hours. If you want to do it with "wet on wet", apply the second coat of MyPool XL, one hour after the first.

Aplicación de microcemento con una llana de goma


The coating system should have a thickness of between 3 to 5 mm. Under no circumstances should this figure be exceeded. If you want surfaces with a greater smoothness, you can simply sand the layers with 40 or 80 grit sandpaper.

Suspend the installation and postpone it to another time when it does not rain. It is highly recommended to check the weather forecast.

Without any problem. This microcement system for swimming pools can be used both in those that have already been built and in those that have not yet been built.

Of course, you just have to waterproof the concrete so that the support is in the best conditions.

With waterproofing mortars and gresite, due to the anchorage on these supports.

MyPool is a system that has its own specific primer. This is MySealant Pool.

MySealant Pool has been designed as a specific sealer for the MyPool microcement for swimming pools. If another varnish were applied, the chemical resistances and hardness would decrease, so we do not recommend it.

Due to its drying speed, it is possible to apply the two coats of varnish on the same day. Just wait between 5-6 hours between coats.

It is possible, but from MyRevest® we encourage not to deviate from the two colors, Natural White and White (with pigment) that we present in our color chart, as they are the ones with guarantees.

The maintenance to follow is the same one that would be required for any other type of swimming pool or material. However, it is advisable to perform a pressure water cleaning every 1 or 2 years on the topmost varnish layer. But, the surface must be sanded previously.

Specifically, 7 days after having sealed it.

Yes. Thanks to the hardness that this microcement system possesses, it can also be used to coat terraces.

Of course. MyPool is a system designed to be applied in both saltwater and chlorine pools.

It's very simple. After applying the third coat, apply the fourth between 4 and 8 hours later. This is how to apply "wet on wet" with our MyPool microcement system for pools.